6063 aluminum rods
Update: 2019/6/12??????View:
- Brand: ???
- Type: ???
Introduction
Product introduction
It has excellent processing performance, excellent weldability and excellent anodic oxidation effect
6063 aluminum alloy material. The main alloy elements are magnesium and silicon, with excellent processing properties, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish and color film, excellent anodizing effect, is a typical extrusion alloy. With its good plasticity, moderate heat treatment intensity, good welding performance and anodized treatment, the 6063 aluminum alloy profile is widely used in building profiles, irrigation pipes, tubes, rods and profiles for vehicles, platforms, furniture, lifts, fences, etc.6063 is a low-alloyed al-mg-si alloy with high plasticity. It has many valuable features: 1. Heat treatment intensification, high impact toughness, insensitive to notch. 2. Excellent welding performance and corrosion resistance, no stress corrosion cracking tendency, among the heat-treatable aluminum alloy, al-mg-si alloy is the only alloy without stress corrosion cracking phenomenon. 3. After processing, the surface is very bright and clean, and easy to anodize and stain. The disadvantage is that after quenching, if left at room temperature for a period of time, the aging will have an adverse effect on the strength (parking effect).
Typical application
6063 aluminum alloy is widely used in the construction of aluminum doors and Windows, curtain wall of the frame, in order to ensure that doors and Windows, curtain wall with high wind pressure resistance performance, assembly performance, corrosion resistance and decorative performance, aluminum alloy profile comprehensive performance requirements are much higher than industrial profile standards.
Chemical composition
| 合金牌號 | 硅Si | 鐵Fe | 銅Cu | 錳Mn | 鎂Mg | 鉻Cr | 鋅Zn | 鈦Ti | 鋯Zr | 其它 | 鋁AL | |||
| 新牌號 | 舊牌號 | 0.2-0.6 | 0.35 | 0.10 | 0.15 | 0.6-0.9 | 0.05 | 0.15 | 0.10 | —— | 每個 | 總計 | ||
| 6063 | LD31 | 0.05 | 0.15 | 余量 | ||||||||||
Mechanical properties of
|
鋁合金牌號及 狀態 |
抗拉強度 Rm/Mpa |
屈服強度 Rp0.2/Mpa |
延伸率/% | 硬度/ HBWα | ||||||||||
| 6063-T6 | 240 | 190 | 8 | 80 |
Physical properties of
|
鋁合金牌號及 狀態 |
熱膨脹系數 (20-100℃) μm/m·k |
熔點范圍 (℃) |
電導率 20℃(68℉) (%IACS) |
電阻率20℃(68℉) Ωmm2/m |
密度 (20℃)(g/cm3) |
|||||||||
| 6063-T6 | 23.4 | 615-655 | 53 | 0.033 |
2.8 |
|||||||||
More Products
